Blog

Epoxy Floor Installation – Tips And Other Crucial Suggestions To Keep In Mind

Epoxy Floor Installation: When and Why Should You Use Epoxy? The reasons are limitless when it comes to epoxy floor installation. The concrete flooring has so many advantages, including being able to provide better resistance to wear and tear, staining, and chemical corrosion.

If you are looking for a new floor surface that will last for years to come, then epoxy is the way to go. There are a few things that need to be considered, however, when considering epoxy floor installation.

First and foremost, if you have any type of sub-flooring, the preparation must be done before the epoxy floor coating is applied. Depending on the age of your building, use of the room, or the condition of the underlying slab, different tests might be needed, like relative humidity or Calcium Chloride testing to determine the relative moisture content of your slab.

Of course, these factors are only important if the concrete is not sealed. If your slab is sealed, then epoxy floor installation will work fine. But, if your concrete is already cracked or worn, then it is recommended you move on to another type of flooring application.

There are several epoxy floor installation products on the market today. Some are better than others. When selecting an epoxy floor coating, keep in mind the below-floor-installation conditions, which may affect the performance of your epoxy floor installation product.

For instance, epoxy floor installations made from 100% quartz should be avoided where possible, since this quartz can emit an acidic vapor. If you do use quartz in an epoxy floor installation, you should clean and neutralize the acidic vapor emitted by the floor.

Epoxy garage floor coating is usually applied to bare floors. The purpose of this coating is to reduce stains and prevent staining. Epoxy floor installations made of 100% synthetic resins are considered ideal.

If however, you want your garage floor coating to be able to resist stains like oil stains and grease stains, you need synthetic resins, which are slightly more difficult to work with. Before epoxy floors can be applied, they must be properly prepared.

One important factor for epoxy floor installation is proper preparation. Do not apply the epoxy floors until they have completely dried out. Wait at least two days after washing or vacuuming a floor.

If you have to clean up a wet floor, do it as soon as possible to avoid water seeping into the substrate of your epoxy floors. When doing an epoxy floor installation, make sure you have the proper tools and materials.

Some important tools for epoxy floor installation are a shop vacuum, a shop brush, an epoxy floor coating, a trowel, and a rubber mallet. You may also use hand tools for precise work. When doing an epoxy floor installation, you need to ensure that there is no moisture on the surface of your flooring.

For instance, applying a coating of concrete before it has dried out is not advisable. The moisture may cause the concrete to crack when it dries out. On the other hand, applying a water-based penetrating concrete sealer before the coating process is highly recommended.

When installing, make sure you follow all the necessary guidelines. Proper guidelines include – checking the workspace for any flaws and voids, preparing the base material, cutting out the base material, installing the base material, screwing in the base material, and applying the epoxy flooring.

There are several types of epoxy flooring available in the market, and some types of epoxy are better than others. It is therefore important to do a little research before you embark upon a successful installation. Lean on the great service that Epoxy Experts Montreal has to be well on your way to sturdier and safer floors!